Temperature Control Units-120℃/160℃ Alternating Temperature
Request a Quote
This temperature control unit supports applications with injection mold temperatures of 120℃ and 160℃, allowing for efficient heating adapted to various plastic properties. The heating system operates through two independent circuits by which heat transfer fluids of different temperatures pass through.
Features:
- Single stage pump is adopted to save power and space
- Adopting Italian brand MERI hot water pump to provide high pressure and reduce the temperature difference
- Japan OMRON thermostat, equipped with touch screen PID control panel
- Separate design of control box prevents the entering of water, oil and air
- Pipes are produced from stainless steel
- Fault indication function is available, no professionals required for maintenance
Specification:
| Model | Unit | NTWD-120 | NTWD-160 | |
| Power supply | AC3Φ380V 50HZ or other | AC3Φ380V 50HZ or other | ||
| Temperature control range | ℃ | Room temperature 5℃~120℃ | Room temperature 20℃~160℃ | |
| Temperature control accuracy | ℃ | P.I.D±1℃ | P.I.D±1℃ | |
| Heat transfer medium | Water | water | ||
| Cooling method | Direct cooling | Indirect cooling | ||
| Heating power | KW | 6KW/9KW | 6KW/9KW | |
| Max. flow | L/MIN | 50L/MIN | 50L/MIN | |
| Max. pressure | KG/CM2² | 4KG/CM2 | 4KG/CM2 | |
| Max. power consumption | KW | 13.5KW/19.5KW | 13.5KW/19.5KW | |
| Alarm function | Phase loss, phase reversal, water shortage, over-temperature, overload, overpressure | Phase loss, phase reversal, water shortage, over-temperature, overload, overpressure | ||
| Cooling water pipe | INCH | 1/2" | 1/2" | |
| Circulating water pipe | INCH | 3/8"×4 in 4 out*2 sets | 3/8"×2 in 2 out*2 sets |
Related products
Send Message
Most Recent
More
Other Products
Videos
