Strand Jack
Guoxin offers a selection of single-strand jacks and multi-strand jacks which come in 9 standard models and have a lifting capacity of 15t-775t. The hydraulic strand jack can handle heavy loads horizontally, vertically and angularly. Compared with other hoisting equipment of the same capacity, it is more flexible and ideal for narrow operations. We can design and manufacture strand jacks as per your requirements.
![](https://www.etwinternational.com/public/uploded/3136/b_2_2_strand_jack_2.jpg)
This jack comes with 14 strands. Each one is equipped with a safety device which will lock the strands if they are comprimised.
The strand jack is has 4 strands which can bear a load of 60 tons. The strands are locked mechanically instead of hydraulically.
Technical Parameters of Strand Jack
Model | |||||||||
Lifting capacity (t) | 15 | 45 | 60 | 105 | 185 | 290 | 410 | 580 | 775 |
Stroke (mm) | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 |
Closed height (mm) | 1950 | 2000 | 2000 | 2100 | 2100 | 2200 | 2200 | 2200 | 2300 |
Basic size (mm) | 160 | 330 | 330 | 380 | 470 | 560 | 670 | 760 | 870 |
Weight (kg) | 100 | 500 | 500 | 850 | 1500 | 3000 | 3500 | 4000 | 4500 |
Anchor | |||||||||
Height (mm) | 110 | 160 | 160 | 180 | 210 | 260 | 280 | 280 | 300 |
Basic size (mm) | 70 | 200 | 200 | 250 | 340 | 400 | 450 | 500 | 550 |
Weight (kg) | 2 | 40 | 40 | 80 | 150 | 270 | 370 | 450 | 540 |
Strands | |||||||||
Number of 18mm multi-core strand | 1 | 3 | 4 | 7 | 12 | 19 | 27 | 38 | 51 |
OD (mm) | 18 | 80 | 90 | 120 | 170 | 210 | 265 | 320 | 360 |
Weight (kg) | 1.75 | 5.25 | 7.00 | 12.25 | 21.00 | 33.25 | 47.25 | 66.50 | 89.25 |
Characteristics
1. Each strand jack is comprised of a bottom anchor assembly, the main hydraulic piston, and a top anchor assembly. Operation of the main hydraulic piston moves the cable through the jack, automatically transferring support between the top and bottom anchors, thereby lifting the heavy load. Lowering operation of the hydraulic jacking system is realized using the second hydraulic system with two anchor assemblies to work in conjunction with movement of the main piston to safely lower the cable through the jack.
2. The standard stroke of each strand jack can be up to 500mm. When the hydraulic pressure is less than 350Bar, it can perform at complete lifting capacity.
3. Our strand jacks allow long time continuous operation with low fault risk, and all of them are equipped with hydraulic one-way valves to ensure that all jacks allow maintenance and anchor system refurbishment under a full load. However, maintenance under a full load is unnecessary if you follow our instructions.
4. Thishydraulic jack comes with a set of strands which are engineered from 18mm multi cables. The anchor system has an optimized circulation mode and the safe working load of each jack is designed to be 40% of the breaking strength of each strand.
5. The strand jack is connected to the loads through a fastener at the free end of strands. The fastener is similar to anchors of the jack and can be interchanged.
Applications
Our strand jacks offer a compact, economic and highly controllable solution for heavy loads lifting, lowering and sliding.
1. Bridge: Cable saddle erection; complete bridge span, deck sections and concrete framework lifting, lowering and sliding.
2. Roof: Roof construction of cement silos, exhibition centers, sports halls, shopping malls and jumbo aircraft hangars
3. Offshore structure: load-out various structures including platform decks, jacket frames, guy systems, etc.
4. Power plant: Lifting and lowering boiler, power generator, turbine and steam engine
5. Petrochemical: Reactor installation