MIG Welding Machine / Inverter Welder
Request a Quote
MIG 135E
Features
- Equipped with RILAND’s self-developed RICHI chip and use the advanced IGBT inverter technology;
- Available to 1kg flux-cored self-shield wire, actually welding without gas;
- Synergy, greatly reduce difficulties to adjustment, especially for new welding operator;
- Stable welding performance on small current around 20A, enhancing the capacity to weld thinner metal;
- Lower spatter than that of general flux-cored welding machine;
- Wire inching function act as you press the trigger about 3s under no load;
- Fan as needed, reduce noise and dust inside the machine;
- Intelligent protection: over-current, over-voltage, over heating protection;
Specifications
Model | | |
Power supply (V) | 1 phases 120V±15% | 1 phases 230V±15% |
Frequency (Hz) | 50/60 | 50/60 |
No-load voltage (V) | 55 | 58 |
Rated input current (A) | 21.4 | 13.4 |
Output current range (A) | 45 - 90 | 45-90 |
Output voltage range (V) | 16.3 - 18.5 | 16.3 - 18.5 |
Duty cycle | 20% @90A | 20% @ 90A |
Power factor | >0.7 | >0.7 |
Efficiency (%) | ≥80 | ≥80 |
Type of wire feeder | Internal | Internal |
Welding wire diameter (mm) | 0.8 | 0.8 |
Insulation class | Class F | Class F |
Protection grade | IP21S | IP21S |
Weight without wire drive roll (kg) | 5.4 | 5.4 |
Dimensions (L×W×H) (mm) | 318×135×240 | 318×135×240 |
Package Included
- MIG welding torch
- Ground clamp & cable assembly
- Power cord
- 2m shoulder strap
- E71T-GS self-shielded flux-cored wire (Ø0.8mm)
Applications
Optional Welding Accessories
Steel welding wire brush
Welding safety goggles
Hand-held welding shield
Welding gloves
E71T-GS self-shielded flux-cored wire (Ø0.8mm)
Wire feed drive roll
Related products
Send Message
Most Recent
More
Other Products
Videos