GUIBAO 998 Silicone Weatherproofing Sealant
Waterproof Caulk/ Weather Sealing Silicone/ Weatherproof Sealant
Basic Uses
GUIBAO 998 Silicone Weatherproofing Sealant is designed for
- General weather sealing of glass curtain walls, aluminum curtain walls and terracotta curtain walls
- Sealing the joints of concretes, plastics, metals and etc.
- Excellent weatherability, virtually unaffected by sunlight, rain, snow and ozone
- Neutral cure – suitable for use on metals, coated glass, aluminum panels, terracotta panels, concrete materials, galvanized steel and many other substrates.
- Extension/compression movement capability of up to ±35 percent of the original joint width
- Excellent resistance to temperature extremes, stable and flexible over the temperature range from –50 ℃ to 150 ℃
- Excellent unprimed adhesion to a wide variety of building materials
- Easy of application-ready to use as supplied
- Good compatibility with other neutral silicone sealants
Colours
GUIBAO 998 is available in black, gray, white and other customized colours.
Packaging
GUIBAO 998 is available in disposable cartridges (net 300ml) ,24 pieces to a carton and sausages (net 590ml),20 pieces to a carton
For more details, please download:
These values are not intended for preparing specifications.
| Test Method | Property | Unit | Standard | Result |
| GB/T 13477 (ISO 7390) | Slump | mm | ≤3 | 0 |
| GB/T 13477 (ISO 8394) | Extrusion rate | ml/min | ≥80 | 856 |
| GB/T 13477(ASTM D 2377) | Tack free time | h | ≤3 | 1.1 |
| GB/T 13477 (ISO 7389) | Extension recovery | % | ≥80 | 90 |
| GUIBAO 16776 (ISO 10563) | Weight loss | % | ≤10 | 5.6 |
| GB/T 13477 (ISO 8339) | Modulus at 23℃ | MPa | ＞0.4 | 0.84 |
| GB/T 13477 (ISO 11600) | Movement capability | % | ±35 | ±35 |
| GB/T 13477 (ISO 8340） | Adhesion at fixed stretch | No failure | ||
| GB/T 13477 (ISO 9047) | Adhesion after heat contract and cold extension | |||
| GB/T 13477 | Adhesion after UV-water exposure | |||
*GB: Chinese National Standard
ASTM: American Society for Testing and Materials
ISO: International Standardization Organization
Complete technical information and literature, adhesion testing and compatibility testing results are available from GUIBAO.
Surface Preparation
Clean all joints removing all foreign matter and contaminants such as oil, grease, dust, water, frost, old sealants, surface dirt, or glazing compounds and protective coatings.
Application Method
Install back-up materials or joint fillers, setting blocks, spacer shims, and tapes. Mask areas adjacent to joints to ensure neat sealant lines. Primer is generally not required for non-porous surfaces, but may be necessary for optimal seal performance of certain porous surfaces. So adhesion test is always recommended.
Apply GUIBAO 998 in a continuous operation using dispensing guns. Before a skin forms, tool the sealant with light pressure to spread the sealant against the backing materials and joint surfaces. Remove masking tape as soon as the bead is tooled.
