D Series Diesel Engine for Genset

D Series Diesel Engine for Genset
D Series Diesel Engine for Genset
D Series Diesel Engine for Genset
D Series Diesel Engine for Genset
D Series Diesel Engine for Genset
D Series Diesel Engine for Genset
Request a Quote
Description

The D series industrial diesel engine for commercial generator was designed as part of a joint operation between SDEC and Austria AVL. We produced a reinforced design and 4-valve upgrade in 2005 when we cooperate with The Southwest Research Institute (SwRI). All parts are designed and checked according to 295kW outputs and it has an applicable power range of 185-266kW with a large reliability margin. The engine provides good fuel economy and this is the most technically advanced engine in China. It has been selling well for over 20 years, with production of more than 1 million sets. This is the idle matching power for 150-200 kW generator sets.

Outline dimensional drawing
SC8DL: 1472mmW: 762mmH: 1240mm
SC9DL: 1578mmW: 778mmH: 1260mm
Technical parameters
Engine Model SC8D280D2 SC9D310D2 SC9D340D2
Type In-Line Type,Water-Cooled,4-Stroke,Direct Injection
Aspiration Turbo & Intercooler
Number of Cylinders×Bore×Stroke mm 6X114X135 6X114X144
Cylinder Liner Type Wet Liner
Compression Ratio 18:1 18:1 16.5:1
Total Displacement L 8.3 8.9
Speed Governing Rate % ≤5
Rated Power kW 185 208 228
Rated Speed rpm 1500 1500/1800 1500/1800
Standby Power kW 204 228 255
Min Fuel Consumption g/kW·h 198
Exhaust Smoke FSN 1.0
Oil Capacity L 15-19 22-25
Cooling System Capacity L 12
Oil Consumption g/kW·h ≤0.3
Emission Standards
STAGE Ⅱ
Noise DB(A) 105
Net Weight KG 740 KG 900 KG
Dimensions (L×W×H) mm 1529X762X1309
Flywheel and Flywheel Housing SAE2# & 11.5#
Engine Model 6DTAA8.9-G31 6DTAA8.9-G32 6DTAA8.9-G33 6DTAA8.9-G34
Type In-Line Type,Water-Cooled,4-Stroke,Direct Injection
Aspiration Turbo & Intercooler
Number of Cylinders×Bore×Stroke mm 6X114X144
Cylinder Liner Type Wet Liner
Compression Ratio 18:1 18:1 16.5:1 16.5:1
Total Displacement L 8.9
Speed Governing Rate % ≤5
Rated Power kW 185/205 208/235 230/255 255/280
Rated Speed rpm 1500/1800 1500/1800 1500/1800 1500/1800
Standby Power kW 204/226 228/259 253/282 280/308
Min Fuel Consumption g/kW·h 192
Exhaust Smoke FSN 1.0
Oil Capacity L 22-25
Cooling System Capacity L 12
Oil Consumption g/kW·h ≤0.3
Emission Standards
STAGE Ⅲ
Noise DB(A) 105
Net Weight KG 740 KG 900 KG
Dimensions (L×W×H) mm 1408X762X1186 1493X762X1260
Flywheel and Flywheel Housing SAE2# & 11.5#
Features
  • Adopting four valves structure, high strength cylinder block and integral cylinder head design, the key components adopt international first-class brands, resulting high reliability and efficiency.
  • Following SAIC MOTOR manufacturing standard and ensured by the German Volkswagen engine quality control system, the engine is of high quality and good consistency.
  • The whole structure adopts integral parts design, so the parts number is 20% less than the traditional diesel engines, with simple structure and convenient maintenance.
  • Without intake air heating auxiliary device, the cold starting temperature is -10℃. And the starting temperature with auxiliary device is 30℃. The environmental adaptability is strong.
  • This engine meets Off-Road China II emission standard.

Related Products
SDEC engine, genset engine, commercial engine, diesel power generation, generator engine

Related products
Send Message
Inquiry
Inquiry