Linear EVA Injection Moulding Machine, ZF206E/ZH208E
This EVA injection moulding machine is suitable for the production of single-colour foam products like rain boots, midsoles, slippers, sandals, yoga sticks and cushions. It can handle raw materials of EVA and rubber particles.
| Item | Unit | | |
| Raw materials | EVA, Rubber | ||
| Stations | 6 | 8 | |
| Screw diameter | mm | 60/65*2 | |
| Maximum injection volume | CC | 980/1150*2 | |
| Injection pressure | MPa | 120 | |
| Clamping force | Tons | 220 | |
| Yield | Pairs/hour | 180-250 | 200-300 |
| Mould space | mm | 290*550*2set | |
| Mould opening stroke | mm | 350 | |
| Mould thickness | mm | 100-330 | |
| Injection cylinder diameter/stroke | mm | ∅250*350 | |
| Screw power | kW | 14 | |
| Template heating power | kW | 12*6 | 12*8 |
| Servo motor power | kW | 52 | |
| Total power | kW | 138 | 162 |
| Dimensions | cm | 790×470×300 | 970×470×300 |
| Machine weight | Tons | 25.6 | 32.7 |
| Oil consumption | L | 1200 | |
-
Energy-saving hydraulic servo control system
-
Suction machine
- Large template design and superior clamping force;
- Shuttle table allows for smooth station switching;
- This linear EVA injection moulding machine has a constant temperature system and a powerful vacuum system;
- Screw rod is made through special techniques that ensure durable and effective performance;
- Safety measures involving different machine parts have been taken;
- Efficient feeding system is configured to save a lot of time;
-
Standard industrial human-machine interface (HMI) and PLC control system are installed;
-
PLC control system
-
PLC
-
HMI interface
-
-
Servo system is installed to save energy and reduce costs;
-
Servo system
-
-
Cooling tower cools down hydraulic oil and raw materials before they are fed into the injection moulding machine;
-
Air compressor is connected to the shoe injection moulding machine to ensure enough air supply;
-
Drying system is used to avoid bubbles in finished products and make better foam soles;
| Parts list | ||
| Toolbox | / | 1pc |
| Allen key | 1.5-10 | 9 sets |
| Allen key | 12 | 1pc |
| Allen key | 14 | 1pc |
| Allen key | 17 | 1pc |
| Open-end wrench | 8-32 | 6 sets |
| Open-end wrench | 41-46 | 1pc |
| Slotted Screwdriver | 6# | 1pc |
| Phillips screwdriver | 6# | 1pc |
| Adjustable wrench | 375-46 mm | 1pc |
| Vacuum pump oil | / | 1 liter |
| O-ring | 60*3.1 | 2pcs |
| O-ring | 95*3.1 | 1pc |
| O-ring | 120*3.53 | 1pc |
| O-ring | 140*3.1 | 1pc |
| O-ring | 200*5.7 | 1pc |
| O-ring | 195*3.1 | 4pcs |
| O-ring | 160(inner)*3.1 | 2pcs |
| O-ring | 40*2.65 | 2pcs |
| O-ring | 20*3.1 | 1pc |
| Pressure gauge | 400KG | 1pc |
| Vertical pressure gauge | 400KG | 1pc |
| Heating rod | Φ16*500 | 4pcs |
| Solid state relay | / | 5pcs |
| Proximity switch | Q18-05NK | 5pcs |
| Heating ring | φ118*50 | 1pc |
| Heating plate | 250*65 | 1pc |
| Thermal resistance | / | 5pcs |
| User manual | / | 1 |
| Ground anchor plate | CB001 | 40pcs |
| Pneumatic spray gun | / | 4pcs |
| Upper mould locking bolt | CB002 | 30pcs |
| Mould locking bolt gasket | CB003 | 30pcs |
| Lower mould locking bolt | M12X65 | 48pcs |
| Spray gun | / | 4pcs |
| Mould coupling | CB004 | 16pcs |
| Thermocouple | / | 4pcs |
| Gas pipe | φ8 | 30meters |
| Gas pipe fittings | φ8 Tee | 10pcs |
| Gas pipe fittings | φ8 Coupling | 10pcs |
| Gas pipe fittings | Z1/4-8 Coupling | 10pcs |
| Gas pipe fittings | Z1/4 Quick connect coupler | 10pcs |
| Wire rope | / | 8meters |
| Rope tensioner | / | 4pcs |
| Wire buckle | / | 4pcs |
| Pulley | / | 4pcs |
| Cable tie | 10*500 | 1pack |
| Cable tie | 5*250 | 1pack |
| Nut | M27 | 36pcs |
| Magnetic switch | 3pcs | |
| Temperature controller | H-D48 | 3pcs |
| Current meter | 85L17-300/5 | 1pc |
| Current meter | 85L17-1A | 1pc |
| Blower | 120*120-220V | 1pc |
| Double proportional valve amplifier board | / | 1pc |
| Drive board | 127 | 2pcs |
| Alarm lamp | 24V yellow | 1pc |
| Warning buzzer | / | 1pc |
| 5-way 2-position pneumatic valve | 24V | 2pcs |
| High temperature valve | 24V-3/8 | 2pcs |
| Sliding block | 35 | 1pc |
| Non-return valve | 55 | 1pc |
| Bushing | φ45*φ55 | 5pcs |
| Torpedo nozzle | / | 1pc |
| Check ring | / | 1pc |
| Transition ring | / | 1pc |
| Pneumatic combination unit | / | 1pc |
| Vacuum gauge | / | 2pcs |
