Description of product
This fired lacquer curing oven is the associated equipment of tube machine line, which plays the role of solidification after spraying the inner wall. This curing oven is a necessary equipment in the aluminum tube production line, which equipped with interior wall painting equipment. Equipped with a separate drive motor, this curing oven can either run synchronously with the front and rear equipment or work separately.

The GHG02 curing oven is heated with gas. The spraying tube, which is driven by the conveyor chain, is transferred to the stainless steel "C" type ship in the curing oven. The "C" type ship pours out the tube after baking at high temperature and falls into the delivery chain. After baking at high temperature for a certain period in the curing oven, the inner spraying liquid attached to the tubes inner wall was dried and firmly attached to the wall, thus completing the whole curing process.

• Suitable diameter of tube: 16-25mm25-35mm
• Suitable length of tube: 200mm
• Production rate: 120 tubes/minute
• Power: 3KW
• Operating temperature: 200-450
• Dimension: 5785*1400*2550mm
• Weight: 6000Kg/oven

• The curing oven for aluminum tube is controlled by PLC and can control the temperature automatically. The SCIO burners can automatically adjust the flame size according to the temperature change in the oven. The FUJI temperature controller ensures temperature within the plus or minus 2 of set temperature.
• The curing oven adopts hot air circulation system(heating box, wind turbine, wind tunnels). The box is equipped with convection stirring technology, so the temperature is very even. The hot air is continuously circulated in the chamber of oven after loop transportation and the temperature in the heating oven is even, so the annealing effect is good and the product quality is high.
• The machine has the advantages of safety, convenience, environmental protection and energy saving. Both natural gas and liquefied petroleum gas can be used. This machine uses gas heating, which has the advantage of low cost and fast heating.
• The feed conveying chain adopts continuously variable regulation, which can make the equipment synchronized with the production speed of the front-end equipment. The main driving force of the chain in the oven is provided by the spraying machine.
• The suspended structure of the chamber of oven facilitates maintenance and makes the operation of the conveyor ship more balanced. It reduces the phenomenon of cans being dropped and broken, thus improving the qualification rate of the product.