AWM 3512 Heat Resistant Silicone Rubber Wire

AWM 3512 Heat Resistant Silicone Rubber Wire
Request a Quote

Conductor: Bare copper, tinned copper
Insulator: Silicone rubber
Rated volt.: 600V
Test voltage: 2000V. 1in
Rated temp.: -60℃~ 200℃
Flame test: FT2

Application
AWM 3512 heat resistant silicone rubber wires are used where high flexibility is required and high temperature conditions. It is therefore a suitable connection cable for home electric appliance, high voltage machines like transformers, generators, motors, traction machines.

Technical Parameters
Conductor Insulation Wire OD Resistance
Size Construction OD Nominal Nominal Toler. Ω/KM
mm² No./mm mm mm mm mm Max.
0.50 16/0.20 0.95 0.76 2.5 ±0.10 40.1
0.75 24/0.20 1.15 0.76 2.7 ±0.15 26.7
1.0 32/0.20 1.34 0.76 2.9 ±0.15 20.0
1.5 30/0.25 1.60 0.76 3.2 ±0.20 13.7
2.0 41/0.25 1.90 0.76 3.5 ±0.20 9.9
2.5 49/0.25 2.00 0.76 3.6 ±0.20 8.21
4 56/0.30 2.70 0.76 4.3 ±0.20 5.09
6 84/0.30 3.30 1.14 5.6 0.30 3.39
-0.20
10 84/0.40 4.60 1.52 7.7 0.30 1.95
-0.20
16 126/0.40 5.80 1.52 8.9 0.30 1.24
-0.20
25 196/0.40 7.30 1.52 10.4 0.30 0.795
-0.20
35 276/0.40 8.60 1.52 11.7 0.30 0.565
-0.20
50 396/0.40 10.7 2.0 14.7 0.40 0.393
-0.20
70 360/0.50 12.4 2.0 16.4 0.40 0.277
-0.20
95 475/0.50 14.5 2.0 18.5 0.40 0.210
-0.20
120 608/0.50 16.0 2.4 20.8 0.40 0.164
-0.20
150 756/0.50 18.0 2.4 22.8 0.60 0.132
-0.30
185 925/0.50 20.0 2.4 24.8 0.60 0.108
-0.30
240 1221/0.50 23.0 2.4 27.8 0.60 0.0817
-0.30

Mechanical Properties
Tensile strength: 3.45N/mm2 min.
Elongation at break of insulation: ≥100%
Min. bending radius: 6×OD
Standard: UL758, UL62 and UL1581
Meet with RoHS, REACH rules.

Characteristics
Silicone rubber wire & cable have very good flexibility and good performance of resistance to high temperature, range from -55℃ up to 150℃.
The use of silicone rubber, a high grade corona resistant insulation material, gives the AWM 3512 heat resistant silicone rubber wire excellent dielectric strength.

Form
Related products
Send Message
Inquiry
Inquiry