HDPE Gas Pipe

Request a Quote

About Us: http://lede-fittings.com/1-1-7-hdpe-coupling/index.html

PE gas pipes are extruded using a special polyethylene plastic extruder with raw materials. They are often used in urban gas transmission of plastic tubing. As PE is the insert material, it can resist corrosion from a variety of chemicals, and there is no electrochemical corrosion. The HDPE gas pipe also has a high toughness, an elongation of 500 meters, and an excellent aseismic performance. These PE gas pipes have a strong resistance to cracking, and a slow or fast growth ability, based on customer requirements, in order to reduce the risk of accidents caused by cracks in the pipe.

PE100 gas pipeline orange color
PE80 gas pipeline yellow color
Pipeline equipment

Product Standard: GB15558/EN1555/ISO8085/ISO4437/GIS PL2

The main production equipment of PE pipe

NO.	Device Name	Model No.	Brand	Field	Purpose	Quantity	Applicable diameter or specifications	Use date
1	Pipe production line	BCE1-90-30B/6	Battenfield	Germany	PE Pipe production	2Lines	dn250-800mm	2007.3
2	Pipe production line	BCE1-60-30B/4	Battenfield	Germany	PE Pipe production	7Lines	dn32-110mm	2001 ,2006
3	Pipe production line	BCE1-90-30B/4	Battenfield	Germany	PE Pipe production	7Lines	dn110-250mm	2001,2005
4	Pipe production line	BCE1-120-30B/4	Battenfield	Germany	PE Pipe production	4Lines	dn250-630mm	2001,2007
5	Ultrasonic thickness gauge	MK125	iNOEX	Germany	Keep the constant unit weight, optimize wall thickness, inspect error all the time	7Lines	---	2010.1
6	Ultrasonic thickness gauge	AFM630	iNOEX	Germany	Keep the constant unit weight, optimize wall thickness, inspect error all the time	4Lines	---	2010.1
7	Ultrasonic thickness gauge	ULTRAMAC-250-4	Walthmac	Mianyang	Keep the constant unit weight, optimize wall thickness, inspect error all the time	3Lines	---	2010.3
8	Ultrasonic thickness gauge	ULTRAMAC450-8T/1	Walthmac	Mianyang	Keep the constant unit weight, optimize wall thickness, inspect error all the time	3Lines	---	2010.1
9	Ultrasonic thickness gauge	ULTRAMAC-47	Walthmac	Mianyang	Keep the constant unit weight, optimize wall thickness, inspect error all the time	3Lines	---	2010.8
10	Extruder feeding device	---	iNOEX	Germany	Raw material drying,feeding	10Lines	---	2007.7-8
11	Extruder feeding device	---	INOEX	Germany	Raw material drying,feeding	10Lines	---	2008.6-12

Item		Standard Requirements
Appearance		Both outer and inner surface of pipe should be clean, smooth, and is not allowed to have bubbles, obvious scratches, depression, impurity, uneven color defect. Pipe ends shall be cut flat for smooth mouth of the pipe.
Themo stability (200℃)		>20 min
Elongation at break		≥350
Longitudinal contraction rate %		≤3
Melt flowing rate(MFR), g/10min (190℃, 5kg)		MFR <20%
Hydrostatic Strength	PE80	20 ℃ , Hoop Stress 9.0MPa, ≥ 100h No Failure, No Leakage
		80 ℃ , Hoop Stress 4.5MPa, ≥ 165h No Failure, No Leakage
		80 ℃ , Hoop Stress 4.0MPa, ≥ 1000h No Failure, No Leakage
	PE100	20 ℃ , Hoop Stress 12.4.MPa, ≥ 100h No Failure, No Leakage
		80 ℃ , Hoop Stress 5.4MPa, ≥ 165h No Failure, No Leakage
		80 ℃ , Hoop Stress 5.0MPa, ≥ 1000h No Failure, No Leakage