Ni60Cr15 High Resistance Alloy

Ni60Cr15 High Resistance Alloy
Request a Quote

Introduction:
Ni60Cr15 resistance alloy is made of nichrome alloy, with high resistivity, good oxidation resistance, good stability and ductility and good welding performance. Its maximum operating temperature is 1150℃ and its service life is longer than FeCrAl alloy.

Supplied style and specification
Style Specification
Wire Diameter: 0.03mm-8mm
Flat strip Width: 0.4-40 Thickness: 0.03-2.9mm
Strip Width: 8-250mm Thickness: 0.1-3.0
Foil Width: 6-120mm Thickness: 0.003-0.1
Rod Diameter: 8-100mm Length: 50-1000

Application
Ni60Cr15 resistance alloy has been widely used in metal casing elements like hot plate, gridiron, oven, storage heater, the coil of clothes dryer, fan heater, hand dryer and various resistors.

Chemical composition (%)
C P S Mn Si Cr Ni Al Fe Other
0.08 0.02 0.015 0.60 0.75~1.60 15.0~18.0 55.0~61.0 ≤0.50 Bal. -
Parameters
Yield strength (Mpa) Tensile strength
(Mpa)
Elongation (%) Density (g/cm3) Resistivity (20℃)
(Ω·mm2/m)
Heat conductivity (20℃)
(W/(m·K))
Average linear expansion coefficient (20℃-1000℃)
(1/℃)
Specific heat capacity (20℃) (J/( kg℃)) Melting point
(℃)
Max. operating temperature (℃) Magnetism
370 730 35 8.2 1.12 13 17x10-6 0.46 1390 1150 Non
Resistance temperature factor (correction factor)
20℃ 100℃ 200℃ 300℃ 400℃ 500℃ 600℃
1 1.011 1.024 1.038 1.052 1.064 1.069
700℃ 800℃ 900℃ 1000℃ 1100℃ 1200℃ 1300℃
1.073 1.078 1.088 1.095 1.109 - -

Index
nickel chromium alloy, resistance wire, alloy strip, NiCr alloy

Related products
Send Message
Inquiry
Inquiry